Can Bus Lost - JLG 1500SJ Operation And Safety Manual

CAN Bus Lost

When the control system senses a communication loss with any
of the control modules (BLAM, Chassis, UGM, or Jib Control Mod-
ule), the display will show a CAN Communication lost until the
communications are reset.
3121261
SECTION 5 - LCD DISPLAY PANEL - GENERATION 1 & 2
NOTE: There is no way to get the active DTCs so, the previously active
DTCs will be scrolling along with the CAN Bus Communication
lost DTC. This DTC needs to be cleared in order for the communi-
cations to reset.
Figure 5-26. CAN Bus Lost Screen
– JLG Lift – 5-39