Swing Drive Lubrication - JLG 1200SJP Service And Maintenance Manual

SECTION 3 - CHASSIS & TURNTABLE
7. Torque the setscrew to 50 foot-pounds (68 Nm).
8. Torque the capscrews shown in step 5 to 660 foot-
pounds (896 Nm).
9. Remove shim and discard.

3.21 SWING DRIVE LUBRICATION

1 Brake Bleed Port
2 Brake Fill Port
3 Gearbox Fill Port
4 Gearbox Drain Port
Figure 3-60. Swing Drive Ports (SN 0300201016 through
0300254466, SN B300002238 to Present)
3-108
1
2
1 Gearbox Fill Port
2 Gearbox Drain Port
Figure 3-61. Swing Drive Ports (SN0300254467 to Present)
The Swing Gearbox is to be filled with 79 ounces (2.3 L) of API
Service Classification GL-5 Extreme Pressure Gear Lube. Fill to
cover the ring gear.
1.195 IN. (30.35 mm) TOP OF HOUSING TO TOP
OF RING GEAR. TO BE FILLED TO COVER RING
GEAR.
Figure 3-62. Swing Drive Lubrication
The Swing Brake is to be filled half full, 2.7 ounces (80 ml), with
DTE24 oil.
MAE37630
3121142