Connecting The Sun Storagetek 5320 Nas Gateway System Or Nas Gateway Cluster System To The Sun Storedge 99Xx System; Connecting Directly To The Sun Storedge 99Xx System; To Connect A Single-Server Direct Attach To Sun Storedge 99Xx System - Sun Microsystems StorageTek 5320 Getting Started Manual

Connecting the Sun StorageTek 5320
NAS Gateway System or NAS Gateway
Cluster System to the Sun StorEdge 99xx
System
This section describes how to cable the Sun StorageTek 5320 NAS Gateway System
or NAS Gateway Cluster System directly or through fabric switches to the Sun
StorEdge 99xx system:
"Connecting Directly to the Sun StorEdge 99xx System" on page 143
■
"Using Fabric Switches to Connect to the Sun StorEdge 99xx System" on page 148
■
After connecting the systems, proceed to
Connecting Directly to the Sun StorEdge 99xx
System
The following direct attach configurations are described in this section:
"To Connect a Single-Server Direct Attach to Sun StorEdge 99xx System" on
■
page 143
"To Connect a Dual-Server Direct Attach to Sun StorEdge 99xx System" on
■
page 145
Note – Do not power on the server until instructed in
StorageTek 5320 NAS Gateway System" on page
▼
To Connect a Single-Server Direct Attach to Sun StorEdge
99xx System
You can connect to SAN storage with one or two pairs of optical fiber cables. Using
two pairs to connect all HBA ports ensures redundancy and improves processing
speed.
1. Connect the HBA Port 1 of the first HBA card (PCI1) to the first available port on
the Sun StorEdge 99xx system.
Chapter 5 Installing the Sun StorageTek 5320 NAS Gateway System
"Connecting to the Network" on page
"Powering On the Sun
161.
159.
143