▼ To Verify and Complete the SIM Board
Replacement
1. Wait approximately 60 seconds for the SIM board to complete its boot process,
at which point ensure that the following is true:
The Power LED is solid green.
■
The SIM Locate LED is off. See
■
Related Documentation
For additional information about the Sun Storage J4200 array disk tray, see the
following product documentation:
Application
Regulatory and safety
information
Multilanguage safety
information
Site planning information
Installation at a glance
Late-breaking information
not included in the
information set
Installation and use of the
management software using
a GUI
Installation and use of the
management software using
a CLI
General operation and
troubleshooting
Disk drive replacement
procedures
SIM board replacement
procedures
6
Sun Storage J4200 Array SIM Board Replacement Guide • April 2008
.
FIGURE 1
Title
Sun StorageTek Regulatory and Safety
Compliance Manual
Important Safety Information for Sun
Hardware Systems
Sun Storage J4200/J4400 Array Site
Preparation Guide
Sun Storage J4200 Array Setup and
Installation Poster
Sun Storage J4200/J4400 Array Release
Notes
Sun StorageTek J4000 Array Family
Management Software Guide, Graphical
User Interface
Sun StorageTek J4000 Array Family
Management Software Guide, Command
Line Interface
Sun Storage J4200/J4400 Array Overview
Sun Storage J4200/J4400 Array Disk Drive
Replacement Guide
Sun Storage J4200 Array SIM Board
Replacement Guide
Part Number
96272, Revision A
816-7190-nn
820-3219-nn
820-3221-nn
820-2222-nn
820-3765-nn
820-4419-nn
820-3223-nn
820-3225-nn
820-3226-nn