Intel F-Tile SDI II Agilex User Manual page 10

Figure 9. Selecting Video Format Through System Console
8. The analyzer should be able to display the video generated from the source. Refer
to jumper settings in the
jumper (J8) position before switching between fractional frame rate and integer
frame rate video format. You must press the push button (PB0) to trigger a device
(LMK03328) power cycling through the PDN pin every time you change the jumper
(J8) position.
Figure 10. Jumper Settings on Nextera 12G-SDI FMC Daughtercard
® ™
F-Tile SDI II Intel Agilex FPGA IP Design Example User Guide
10
®
1. F-Tile SDI II Intel Agilex
Jumper Settings and Descriptions
™
FPGA IP Design Example Quick Start Guide
710496 | 2022.01.28
Table to change the
Send Feedback