Hardware And Software Requirements - Intel F-Tile SDI II Agilex User Manual

Figure 11. Components required for TX or RX only design on Intel Agilex Device
Top
TX Top
Note: Refer to
connections.

2.2. Hardware and Software Requirements

Intel uses the following hardware and software to test the design example:
Hardware
• Agilex I-Series SOC Development Kit
• SDI Signal Generator
• SDI Signal Analyzer
• BNC to BNC cables
• VIDIO
card)
® ™
F-Tile SDI II Intel Agilex FPGA IP Design Example User Guide
14
SDI TX Sys
F-tile PMA/
FEC Direct
SDI II
PHY IP (TX)
(TX)
SDI F-tile
PHY Adapter
Parallel Data
Serial Data
Clocking Scheme on page 22 for the Reference and System PLL Clocks IP
TM
FMC Development Module VIDIO-12G-A (Nextera 12G SDI FMC daughter
2. Design Example Detailed Description
SDI RX Sys
F-tile PMA/
Video Pattern
FEC Direct
Generator
PHY IP (RX)
Pattern Gen
Control PIO
JTAG to Avalon
Master Bridge
Pattern Ctrl
Device_init
Reference
and System
PLL Clocks IP
Control/Status TX Only Components
Avalon-MM RX Only Components
Common components for TX/RX only design
710496 | 2022.01.28
SDI II
(RX)
SDI F-tile
PHY Adapter
RX Top
Send Feedback