Table 2-1 Environmental Requirements - SMART Embedded Computing MVME2500 Installation & Use Manual

Table 2-1
Characteristics
Applicable Variants
Cooling Method
Operating Temperature 0°C to +55°C
Storage
Vibration Sine
(10min/axis)
Vibration Random
(1hr/axis)
Shock
Humidity
1. Flat 15-1000Hz, -6db/octave 1000Hz - 2000Hz [MIL-STD 810F Figure 514.5C-17]
Product Damage
High humidity and condensation on the board surface causes short circuits.
Do not operate the board outside the specified environmental limits.
Make sure the board is completely dry and there is no moisture on any surface
before applying power.
MVME2500 Installation and Use (6806800L01S)
Environmental Requirements
Commercial Versions
MVME2500-nnnnnnn1E/1S
MVME2500-nnnnnnn1E/1S–N
Forced Air 7CFM
-40°C to +85°C
2G, 5 to 2000Hz
(01080101E, rev L02U and later:
2G, 5 to 500Hz)
2
0.01g /Hz, 15 to 2000Hz
[01080101E, rev L02U and later:
2
0.002g /Hz, 15 to 2000Hz
(2GRMS)]
20g/11mS
to 95% RH (non-condensing)
Hardware Preparation and Installation
Extended Temperature Versions
MVME2500-02100202E
MVME2500-021CCxxxx
Forced Air 7CFM
-40°C to +71°C
-50°C to +100°C
5G, 15 to 2000Hz
0.04g
30g/11mS
to 95% RH (non-condensing)
to 100% RH (non-condensing,
CC variants)
NOTICE
2
/Hz, 15 to 2000Hz (8GRMS)
1
33