1. Manuals
  2. Brands
  3. SMART Embedded Computing Manuals
  4. Single board computers
  5. COMX-CORE-2610-ET
  6. Installation and use manual

SMART Embedded Computing COMX-CORE-2610-ET Installation And Use Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
COMX-CORE-2610-ET
Installation and Use
P/N: 6806800P11E
January 2020

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the COMX-CORE-2610-ET and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for SMART Embedded Computing COMX-CORE-2610-ET

Summary of Contents for SMART Embedded Computing COMX-CORE-2610-ET

  • Page 1 COMX-CORE-2610-ET Installation and Use P/N: 6806800P11E January 2020...
  • Page 2 Computing” and the SMART Embedded Computing logo are trademarks of SMART Modular Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. These materials are provided by SMART Embedded Computing as a service to its customers and may be used for informational purposes only. Disclaimer* SMART Embedded Computing (SMART EC) assumes no responsibility for errors or omissions in these materials.

  • Page 3: Table Of Contents

    XDP Connectors ............51 COMX-CORE-2610-ET Installation and Use (6806800P11E)
  • Page 4 5.7.1 Status Code Range ..........82 COMX-CORE-2610-ET Installation and Use (6806800P11E)
  • Page 5 Related Documentation ............89 A.1 SMART Embedded Computing Documentation ....... . . 89...
  • Page 6 Table of Contents COMX-CORE-2610-ET Installation and Use (6806800P11E)
  • Page 7 COMX-CORE-2610-ET Cooler ........
  • Page 8 List of Figures COMX-CORE-2610-ET Installation and Use (6806800P11E)
  • Page 9 Table 1-1 COMX-CORE-2610-ET Features Summary ....... . 26 Table 1-2 Standard Compliance .
  • Page 10 Table A-1 SMART Embedded Computing Publications ....... 89 COMX-CORE-2610-ET Installation and Use (6806800P11E)

  • Page 11: About This Manual

    PC-AT systems. Basic Module COM Express™ 125mm x 95mm module form factor. An application specific circuit board that accepts a COM Express™ Carrier Board module. EEPROM Electrically Erasable Programmable Read-Only Memory. General Purpose Input. COMX-CORE-2610-ET Installation and Use (6806800P11E)
  • Page 12 An integrated circuit; typically interfaced via the LPC bus that provides Super I/O legacy PC I/O functions including PS2 keyboard and mouse ports, serial and parallel port(s) and a floppy interface. HDMI High Definition Multimedia Interface. COMX-CORE-2610-ET Installation and Use (6806800P11E)
  • Page 13 Omission of information from example/command that is not necessary at the time Ranges, for example: 0..4 means one of the integers 0,1,2,3, and 4 (used in registers) Logical OR Indicates a hazardous situation which, if not avoided, could result in death or serious injury COMX-CORE-2610-ET Installation and Use (6806800P11E)
  • Page 14 Indicates an electrical situation that could result in moderate injury or death Indicates that when working in an ESD environment care should be taken to use proper ESD practices No danger encountered, pay attention to important information COMX-CORE-2610-ET Installation and Use (6806800P11E)
  • Page 15 Re-branded to Artesyn template. System Memory on Corrected the pin number as 204 in the 6806800P11C July 2012 page 57 Standard Compliances on page 28 6806800P11B March 2012 Updated the section. 6806800P11A March 2012 Initial version. COMX-CORE-2610-ET Installation and Use (6806800P11E)
  • Page 16 About this Manual COMX-CORE-2610-ET Installation and Use (6806800P11E)

  • Page 17: Safety Notes

    SMART EC warranty for the backplane or boards. This product operates with dangerous voltages that can cause injury or death. Use extreme caution when handling, testing, and adjusting this equipment and its components. COMX-CORE-2610-ET Installation and Use (6806800P11E)
  • Page 18 Keep the fresh air intake at the bottom-front side of the chassis completely clear. Make sure that the fresh air supply is not mixed with hot exhaust from other devices. Make sure that all slots are populated with either blades, filler blades, or dummy blades. COMX-CORE-2610-ET Installation and Use (6806800P11E)
  • Page 19 Installing another battery type than the one that is mounted at product delivery may cause data loss since other battery types may be specified for other environments or may have a shorter lifetime. Only use the same type of lithium battery as is already installed. COMX-CORE-2610-ET Installation and Use (6806800P11E)
  • Page 20 Do not use a screw driver to remove the battery from its holder. Environment Environmental Damage Improperly disposing of used products may harm the environment. Always dispose of used products according to your country’s legislation and manufacturer’s instructions. COMX-CORE-2610-ET Installation and Use (6806800P11E)

  • Page 21: Sicherheitshinweise

    Beschädigung von Schaltkreisen Elektrostatische Entladung und unsachgemäßer Ein- und Ausbau des Produktes kann Schaltkreise beschädigen oder ihre Lebensdauer verkürzen. Bevor Sie das Produkt oder elektronische Komponenten berühren, vergewissern Sie sich, daß Sie in einem ESD-geschützten Bereich arbeiten. COMX-CORE-2610-ET Installation and Use (6806800P11E)
  • Page 22 Hohe Luftfeuchtigkeit und Kondensat auf den Oberflächen der Produkte kann zu Kurzschlüssen führen. Betreiben Sie die Produkte nur innerhalb der angegebenen Grenzwerte für die relative Luftfeuchtigkeit und Temperatur und stellen Sie vor dem Einschalten des Stroms sicher, dass sich auf den Produkten kein Kondensat befindet. COMX-CORE-2610-ET Installation and Use (6806800P11E)
  • Page 23 Produktes installiert war, kann Datenverlust die Folge sein, da die neu installierte Batterie für andere Umgebungsbedingungen oder eine andere Lebenszeit ausgelegt sein könnte. Verwenden Sie daher den gleichen Batterietyp, der bei Auslieferung des Produktes installiert war. COMX-CORE-2610-ET Installation and Use (6806800P11E)
  • Page 24 Benutzen Sie keinesfalls einen Schraubendreher um die Batterie aus der Halterung zu nehmen. Environment Umweltverschmutzung Falsche Entsorgung der Produkte schadet der Umwelt. Entsorgen Sie alte Produkte gemäß der in Ihrem Land gültigen Gesetzgebung und den Empfehlungen des Herstellers. COMX-CORE-2610-ET Installation and Use (6806800P11E)

  • Page 25: Introduction

    Chapter 1 Introduction Overview The COMX-CORE-2610-ET is a COM Express module based on the Intel 2nd Generation Core processors with Intel Mobile QM67 chipset. COM Express is a standard industry embedded computer module defined by PICMG. The COMX-CORE-2610-ET provides the following interfaces to connectors, for connecting with the carrier board.

  • Page 26: Features

    Introduction Features Features The following table lists the features of COMX-CORE-2610-ET. Table 1-1 COMX-CORE-2610-ET Features Summary Features Description Intel Mobile processor Core i7-2610UE. Integrated a dual channel 64bit DDR3 memory controller. Memory capacity up to 8GB per channel, data rate up to 1333MHz and supports non-ECC.
  • Page 27 One 26-pin XDP header for CPU debug. Basic form factor as defined in the PICMG COM.0 COM Express Basic Specification Revision 2.0. COM Express COM Express Type 6 pin-out. Board-to-board interconnectors comprising two 220-pin, 0.5mm pitch Receptacles. COMX-CORE-2610-ET Installation and Use (6806800P11E)

  • Page 28: Standard Compliances

    Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. COMX-CORE-2610-ET Installation and Use (6806800P11E)

  • Page 29: Mechanical Data

    Mechanical Data Mechanical Data The following figures are the top and side view of the board. Figure 1-1 COMX-CORE-2610-ET Mechanical Dimensions (Top and Side View) COMX-CORE-2610-ET Installation and Use (6806800P11E)

  • Page 30: Figure 1-2 Comx-Core-2610-Et Cooler

    Introduction Mechanical Data Figure 1-2 COMX-CORE-2610-ET Cooler COMX-CORE-2610-ET Installation and Use (6806800P11E)

  • Page 31: Ordering And Support Information

    Figure 1-3 COMX-CORE-2610-ET Heat Spreader Ordering and Support Information Refer to the data sheet for the COMX-CORE-2610-ET for a complete list of available variants and accessories. Refer to Appendix A, Related Documentation on page 89 consult your local SMART Embedded Computing sales representative for the availability of other variants.

  • Page 32: Production Identification

    Introduction Production Identification Production Identification The following figure shows the location of the board's serial number. Figure 1-4 Location of Product Serial Number COMX-CORE-2610-ET Installation and Use (6806800P11E)

  • Page 33: Hardware Preparation And Installation

    This board is designed to operate with the input voltages and currents as defined in the fol- lowing tables. Table 2-2 Module with CORE i7 2610UE Power Requirement (with 2x2 GB non-ECC memory) Total power State +12V 5VSB VCC_RTC consumption G3 (AC off) 0.015mW Idle (CMOS Setup) 1.11A 0.042A 13.53W COMX-CORE-2610-ET Installation and Use (6806800P11E)

  • Page 34: Board Thermal Management And Placement

    Board Thermal Management and Placement 2.2.1 Board Thermal Management The COMX-CORE-2610-ET provides several thermal management strategies that includes monitoring CPU junction temperature and board PCB temperature. The board can take corresponding action to protect the system from catastrophic overheating. Figure 2-1 Board Thermal Management A thermal transistor is embedded in the processor.

  • Page 35: Unpacking And Inspecting The Board

    Check for damage and report any damage or differences to customer service. Environmental Damage Improperly disposing of used products may harm the environment Always dispose of used products according to your country's legislation and manufacturer's instructions COMX-CORE-2610-ET Installation and Use (6806800P11E)

  • Page 36: Installing Heat Spreader / Heat Sink Assembly To Com Express Module

    3. From the back side of the module, locate the screw holes for assembling the heat spreader or heat sink. 4. Use the corresponding screws to fasten the heat spreader or heat sink to the module. COMX-CORE-2610-ET Installation and Use (6806800P11E)

  • Page 37: Installing And Removing Com Express Module To/From The Carrier Board

    COM Express module has contact with the five standoffs on the carrier board. 3. From the top-side of the COM Express module assembly, locate the five COM Express module mounting holes. 4. Use the screws to fasten the COM Express module assembly with the carrier board. COMX-CORE-2610-ET Installation and Use (6806800P11E)

  • Page 38: Removal

    1. From the top side of the COM Express module assembly, locate the five screws that connect the COM Express module assembly to the carrier board. 2. Loosen and remove the screws. 3. While holding the edges, pull the COM Express module from the carrier board. COMX-CORE-2610-ET Installation and Use (6806800P11E)

  • Page 39: Controls, Leds, And Connectors

    Chapter 3 Controls, LEDs, and Connectors The following figures illustrate the location of controls, LEDs, and connectors on the COMX-CORE-2610-ET board. Figure 3-1 COMX-CORE-2610-ET Board Layout (Top view) COMX-CORE-2610-ET Installation and Use (6806800P11E)

  • Page 40: Connectors And Switches

    Connectors and Switches 3.1.1 COM Express Connectors COMX-CORE-2610-ET supports Type 6 COM Express connector definition. The signals from COM Express connector are based COM-E SPEC2.0 standard. This section describes the COM Express connector used on the board. The following table lists the signals definitions.

  • Page 41: Table 3-1 Com Express Connector Pin Assignment

    GND (FIXED) GBE0_MDI0- PWRBTN# GBE0_MDI0+ SMB_CK GBE0_CTREF SMB_DAT SUS_S3# SMB_ALERT# SATA0_TX+ SATA1_TX+ SATA0_TX- SATA1_TX- SUS_S4# SUS_STAT# SATA0_RX+ SATA1_RX+ SATA0_RX- SATA1_RX- GND (FIXED) GND (FIXED) SATA2_TX+ SATA3_TX+ SATA2_TX- SATA3_TX- SUS_S5# PWR_OK SATA2_RX+ SATA3_RX+ SATA2_RX- SATA3_RX- BATLOW# COMX-CORE-2610-ET Installation and Use (6806800P11E)
  • Page 42 USB7- USB6+ USB7+ USB_6_7_OC# USB_4_5_OC# USB4- USB5- USB4+ USB5+ GND (FIXED) GND (FIXED) USB2- USB3- USB2+ USB3+ USB_2_3_OC# USB_0_1_OC# USB0- USB1- USB0+ USB1+ VCC_RTC EXCD1_PERST# EXCD0_PERST# EXCD1_CPPE# EXCD0_CPPE# SYS_RESET# LPC_SERIRQ CB_RESET# GND (FIXED) GND (FIXED) COMX-CORE-2610-ET Installation and Use (6806800P11E)
  • Page 43 PCIE_TX3- PCIE_RX3- GND (FIXED) GND (FIXED) PCIE_TX2+ PCIE_RX2+ PCIE_TX2- PCIE_RX2- GPI1 GPO3 PCIE_TX1+ PCIE_RX1+ PCIE_TX1- PCIE_RX1- WAKE0# GPI2 WAKE1# PCIE_TX0+ PCIE_RX0+ PCIE_TX0- PCIE_RX0- GND (FIXED) GND (FIXED) LVDS_A0+ LVDS_B0+ LVDS_A0- LVDS_B0- LVDS_A1+ LVDS_B1+ LVDS_A1- LVDS_B1- COMX-CORE-2610-ET Installation and Use (6806800P11E)
  • Page 44 LVDS_B_CK- LVDS_I2C_CK LVDS_BKLT_CTRL LVDS_I2C_DAT VCC_5V_SBY GPI3 VCC_5V_SBY RSVD VCC_5V_SBY RSVD VCC_5V_SBY PCIE0_CK_REF+ BIOS_DISABLE1# PCIE0_CK_REF- VGA_RED GND (FIXED) GND (FIXED) SPI_POWER VGA_GRN SPI_MISO VGA_BLU GPO0 VGA_HSYNC SPI_CLK VGA_VSYNC SPI_MOSI VGA_I2C_CK TPM_PP VGA_I2C_DAT TYPE10# SPI_CS# SER0_TX RSVD COMX-CORE-2610-ET Installation and Use (6806800P11E)

  • Page 45: Table 3-2 Com Express Connector Pin Assignment (Continued)

    VCC_12V A108 VCC_12V B108 VCC_12V A109 VCC_12V B109 VCC_12V A110 GND (FIXED) B110 GND (FIXED) Table 3-2 COM Express Connector Pin Assignment (continued) PIN Number PIN Name PIN Number PIN Name GND (FIXED) GND (FIXED) COMX-CORE-2610-ET Installation and Use (6806800P11E)
  • Page 46 RSVD RSVD RSVD PCIE_RX6+ PCIE_TX6+ PCIE_RX6- PCIE_TX6- GND (FIXED) GND (FIXED) PCIE_RX7+ PCIE_TX7+ PCIE_RX7- PCIE_TX7- DDI1_HPD RSVD DDI1_PAIR4+ RSVD DDI1_PAIR4- DDI1_PAIR0+ RSVD DDI1_PAIR0- RSVD RSVD DDI1_PAIR5+ DDI1_PAIR1+ DDI1_PAIR5- DDI1_PAIR1- GND (FIXED) GND (FIXED) DDI2_CTRLCLK_A DDI1_PAIR2+ COMX-CORE-2610-ET Installation and Use (6806800P11E)
  • Page 47 RSVD DDI3_PAIR0+ DDI2_PAIR0+ DDI3_PAIR0- DDI2_PAIR0- GND (FIXED) GND (FIXED) DDI3_PAIR1+ DDI2_PAIR1+ DDI3_PAIR1- DDI2_PAIR1- DDI3_HPD DDI2_HPD RSVD RSVD DDI3_PAIR2+ DDI2_PAIR2+ DDI3_PAIR2- DDI2_PAIR2- RSVD RSVD DDI3_PAIR3+ DDI2_PAIR3+ DDI3_PAIR3- DDI2_PAIR3- GND (FIXED) GND (FIXED) PEG_RX0+ PEG_TX0+ PEG_RX0- PEG_TX0- COMX-CORE-2610-ET Installation and Use (6806800P11E)
  • Page 48 GND (FIXED) GND (FIXED) PEG_RX3+ PEG_TX3+ PEG_RX3- PEG_TX3- RSVD RSVD RSVD RSVD PEG_RX4+ PEG_TX4+ PEG_RX4- PEG_TX4- RSVD PEG_RX5+ PEG_TX5+ PEG_RX5- PEG_TX5- GND (FIXED) GND (FIXED) PEG_RX6+ PEG_TX6+ PEG_RX6- PEG_TX6- PEG_RX7+ PEG_TX7+ PEG_RX7- PEG_TX7- RSVD RSVD COMX-CORE-2610-ET Installation and Use (6806800P11E)
  • Page 49 PEG_TX9- RSVD RSVD PEG_RX10+ PEG_TX10+ PEG_RX10- PEG_TX10- PEG_RX11+ PEG_TX11+ PEG_RX11- PEG_TX11- GND (FIXED) GND (FIXED) PEG_RX12+ PEG_TX12+ PEG_RX12- PEG_TX12- PEG_RX13+ PEG_TX13+ PEG_RX13- PEG_TX13- RSVD RSVD PEG_RX14+ PEG_TX14+ PEG_RX14- PEG_TX14- C100 GND (FIXED) D100 GND (FIXED) COMX-CORE-2610-ET Installation and Use (6806800P11E)

  • Page 50: Onboard Leds

    PM Power OK Indicator Green PM Power is OK. PM Power is not OK. System has System Catastrophic experienced a System has No error. error Indicator catastrophic error. PROCHOT# is PROCHOT# is PROCHOT# Indicator asserted. deasserted. COMX-CORE-2610-ET Installation and Use (6806800P11E)

  • Page 51: Switches

    1-4 short, 2-3 short 1x8 + 2x4 lanes XDP Connectors COMX-CORE-2610-ET provides a 26-pin SFF XDP connector for user to access the Intel debug port via a flex cable. It is a 26-pin surface mount Molex* 52435-2671 connector. Table 3-5...
  • Page 52 Controls, LEDs, and Connectors XDP Connectors Table 3-5 J1 XDP Debug Port Connector Pin-out (continued) XDP Signal Name XDP Signal Name HOOK1 HOOK2 HOOK3 HOOK4 HOOK5 VCCOBS_AB HOOK6 HOOK7 TRST# TCK1 TCK0 COMX-CORE-2610-ET Installation and Use (6806800P11E)

  • Page 53: Functional Description

    The following sections describe the physical and electrical structure of the board in detail. The COMX-CORE-2610-ET board is designed to use with a carrier board that can provide power and I/O connectors. It is an extended temperature module, and the temperature can range from -20°C to 70°C.

  • Page 54: Processor

    Functional Description Processor Processor The COMX-CORE-2610-ET is designed to support the Intel 2nd Generation Core and Celeron processors with Intel Mobile QM67 chipset. The features of the processor are:  Four or two execution cores  32KB instruction and 32KB data first-level cache (L1) for each core ...

  • Page 55: Chipset

    TDP include 17W, 25W, 35W and 45W  Package: A 31 x 24mm BGA package (BGA1023) Chipset The COMX-CORE-2610-ET supports Intel Mobile QM67 chipset. The features of the chipset are:  Supports up to eight x1 PCI Express interfaces ...

  • Page 56: Figure 4-2 Board Sm Bus Device Connection Diagram

    Description Factory Data, should not be modified AT24C02C 2Kbit EEPROM by the customer unless instructed SPD0 DDR3 DIMM0 SPD DIMM0 SPD information SPD1 DDR3 DIMM1 SPD DIMM1 SPD information NCT7802Y EC controller EC software code COMX-CORE-2610-ET Installation and Use (6806800P11E)

  • Page 57: System Memory

    System Memory System Memory There are two 204-pin SODIMM slots on COMX-CORE-2610-ET board. They stack on the top of PCB. The following table lists the DDR3 (1.5V) memory banks that have been validated on the COMX-CORE-2610-ET board. Supplier Part Supplier...

  • Page 58: Ethernet Interface

    Ethernet Interface Ethernet Interface The COMX-CORE-2610-ET module provides a 10/100/1000 Ethernet connector, for which the magnetic is placed on the carrier board. The Ethernet MAC is integrated with QM67 and uses 82579LM as GE PHY. GLCI is the connectivity interface between QM67 and 82579LM and it occupies the PCIE port 7.

  • Page 59: Sata Interface

    Figure 4-4 SATA Interface Connections 4.11 USB Interface The QM67 can support up to 14 USB2.0 interfaces using UHCI or EHCI. Eight USB ports are routed to connector for carrier board. Figure 4-5 USB ports Connections COMX-CORE-2610-ET Installation and Use (6806800P11E)

  • Page 60: Vga, Lvds, Lpc And Audio Interface

    HDMI, DVI, and SDVO interface. DDPC and DDPD can be configured as display port, HDMI, and DVI interface. They are routed to COM Express connector. Figure 4-6 Digital Display Connections COMX-CORE-2610-ET Installation and Use (6806800P11E)

  • Page 61: Table 4-2 Configuration Pin Mapping For Ddi Ports

    TMDSB_DATA0 DDPB_[2]N SDVO_BLUE# DDPB_[2]N TMDSB_DATA0# Port B DDPB_[3]P SDVO_CLK DDPB_[3]P TMDSB_CLK DDPB_[3]N SDVO_CLK# DDPB_[3]N TMDSB_CLK# DDPB_AUXP N.A. DDPB_AUXP N.A. DDPB_AUXN N.A. DDPB_AUXN N.A. DDPB_HPD N.A. DDPB_HPD HDMIB_HPD SDVO_CTRLCLKS SDVO_CTRLCLK N.A. HDMIB_CTRLCLK SDVO_CTRLDATA SDVO_CTRLDATA N.A. HDMIB_CTRLDATA COMX-CORE-2610-ET Installation and Use (6806800P11E)
  • Page 62 TMDSC_DATA0 Port C DDPC_[2]N N.A. DDPC_[2]N TMDSC_DATA0# DDPC_[3]P N.A. DDPC_[3]P TMDSC_CLK DDPC_[3]N N.A. DDPC_[3]N TMDSC_CLK# DDPC_AUXP N.A. DDPC_AUXP N.A. DDPC_AUXN N.A. DDPC_AUXN N.A. DDPC_HPD N.A. DDPC_HPD HDMIC_HPD DDPC_CTRLCLK N.A. N.A. HDMIC_CTRLCLK DDPC_CTRLDATA N.A. N.A. HDMIC_CTRLDATA COMX-CORE-2610-ET Installation and Use (6806800P11E)

  • Page 63: Trusted Platform Module

    4.15 SPI Flash The COMX-CORE-2610-ET board provides a 16MB SPI BIOS ROM. Because the SPI bus is also routed to COM Express connector, so there is SPI BIOS ROM on the carrier board. The BIOS_DISABLE# signal from carrier board can be used to configure the boot BIOS ROM.

  • Page 64: Hardware Monitor

    4.16 Hardware Monitor The COMX-CORE-2610-ET board uses NCT7802Y as hardware monitor. It can monitor voltage, temperature, and fan. They can be read in the BIOS setup menu. It also can control the fan rotation speed. It implements voltage monitoring capability on 5V, 1.5V, 1.05V, VGFX core, and CPU core.

  • Page 65: Bios

    Pre-EFI Initialization (PEI) - memory initialization1  Driver Execution Environment (DXE) - main hardware initialization2  Boot Device Selection (BDS) - system setup, pre-OS user interface, and selecting a bootable device (CD/DVD, HDD, USB, Network, Shell, etc.) COMX-CORE-2610-ET Installation and Use (6806800P11E)

  • Page 66: Initializing Setup

    The <Enter> key allows you to select an option to edit its value or <Enter> access a sub menu. The Left and Right arrow keys allow you to select a screen. For Left/Right arrow example: Main screen, Advanced screen, Chipset screen, and so on. COMX-CORE-2610-ET Installation and Use (6806800P11E)

  • Page 67: Main Menu

    When other function keys become available, they are displayed at the Function keys right of the screen along with their intended function. 5.5.1 Main Menu Figure 5-1 Main Menu COMX-CORE-2610-ET Installation and Use (6806800P11E)

  • Page 68: Table 5-2 Main Menu

    Memory Channel A Slot0 Channel A slot0 memory size and type Memory Channel B Slot0 Channel B slot0 memory size and type Table 5-4 Boot Features Field Description NumLock Selects Power-on state for NumLock. Default Setting is On. COMX-CORE-2610-ET Installation and Use (6806800P11E)

  • Page 69: Advance Menu

    Set hard drive and controller configuration. Memory Configuration Displays and provides options to change the memory settings. System Agent (SA) Displays and provides options to change the SA settings. Configuration South Bridge Set south bridge configuration. Configuration COMX-CORE-2610-ET Installation and Use (6806800P11E)

  • Page 70: Table 5-6 Boot Configuration

    When enabled, a VMM can utilize the additional hardware capabilities. Technology Default setting is Disabled. Fast Boot Memory Enable to reduce the amount of time spent initializing memory during a Initialization cold boot. Default setting is Disabled. COMX-CORE-2610-ET Installation and Use (6806800P11E)

  • Page 71: Table 5-8 Processor Power Management

    Enable processor idle power saving C7s state. If enabled, BIOS will C7s-State report C7s instead of C7 to OS. Default setting is Disabled. Table 5-9 Peripheral Configuration Field Description PCIe SR-IOV Support Set IO virtualization. Default setting is Disabled. COMX-CORE-2610-ET Installation and Use (6806800P11E)

  • Page 72: Table 5-10 Hdd Configuration

    Enable/Disable RAID1 feature. Default setting is Enabled. RAID10 Enable/Disable RAID10 feature. Default setting is Enabled. RAID5 Enable/Disable RAID5 feature. Default setting is Enabled. Table 5-12 Memory Configuration Field Description Memory Frequency Maximum memory frequency selections in MHz. Default setting is Auto. COMX-CORE-2610-ET Installation and Use (6806800P11E)

  • Page 73: Table 5-13 System Agent Configuration

    DVMT5.0 DVMT graphics memory size. This has no effect if external DVMT Total Gfx Mem graphics are present. Default setting is 256MB. GT Turbo Mode Control Enable/Disable GT Turbo Mode Control. Default setting is Disabled. IGD Configuration IGD Configuration. COMX-CORE-2610-ET Installation and Use (6806800P11E)

  • Page 74: Table 5-16 Igd Configuration

    Sleep# Function Enable or Disable Sleep# function, Default setting is Disabled. Onboard TPM Enable or Disable Onboard TPM module. Default setting is Enabled. SB USB Config Set USB configuration. SB Azalia Config Set HD Audio configuration. COMX-CORE-2610-ET Installation and Use (6806800P11E)

  • Page 75: Table 5-18 Sb Usb Configuration

    Default setting is Enabled. Enable PCH Internal wake on LAN capability. Default setting is Wake on PCH LAN Disabled. Table 5-21 Hardware Monitor Field Description CPU Temperature Showing CPU Temperature Local Temperature Showing local temperature COMX-CORE-2610-ET Installation and Use (6806800P11E)

  • Page 76: Table 5-22 Amt Configuration

    Enable/Disable USB-R. Default setting is Disabled. Table 5-23 ME Configuration Field Description ME FW Version Intel Management Engine firmware version. ME Firmware Intel Management Engine firmware state. Intel ME Enable/Disable Intel® Management Engine. Default setting is Enabled. COMX-CORE-2610-ET Installation and Use (6806800P11E)

  • Page 77: Security Menu

    Set Supervisor Password Press Enter to set Supervisor Password. Supervisor Hint String Press Enter to type Supervisor Hint String. Set User Password Press Enter to set User Password. User Hint String Press Enter to type User Hint String. COMX-CORE-2610-ET Installation and Use (6806800P11E)

  • Page 78: Table 5-25 Tpm Configuration

    Default setting is Disabled. Table 5-25 TPM Configuration Field Description Current TPM State Current TPM State. Change TPM state. Note: Most TPM options require TPM to be Enabled Change TPM States to take effect. COMX-CORE-2610-ET Installation and Use (6806800P11E)

  • Page 79: Boot Menu

    Boot Menu 5.5.4 Boot Menu Figure 5-4 Boot Menu COMX-CORE-2610-ET Installation and Use (6806800P11E)

  • Page 80: Exit Menu

    You can also press <F9> to perform this task. Load Optimized Defaults Load settings for optimized boot time and system performance. Load the original value of this boot time. Not the default setup Discard Changes value. COMX-CORE-2610-ET Installation and Use (6806800P11E)

  • Page 81: Other Information

    Fedora Core 15 5.6.2 Driver Controllers The following table lists the driver controllers compatible for this product. Table 5-27 Driver Controllers Windows 7 Windows 7 Fedora 32-bit 64-bit 32-bit 64-bit 32-bit 64-bit Chipset Graphic Audio RAID/AHCI COMX-CORE-2610-ET Installation and Use (6806800P11E)

  • Page 82: Acpi Wake Up Support

    Internal Shell: UEFI Shell POST Codes 5.7.1 Status Code Range Table 5-29 Status Code Range Status Code Range Description 0x20 - 0xDF Component status codes 0x00 - 0x0F Progress status codes 0xE0 - 0xEF Architectural status codes COMX-CORE-2610-ET Installation and Use (6806800P11E)

  • Page 83: Table 5-30 Component Status Codes

    POSTCODE_CC_TCG 0x25 POSTCODE_CC_HDD_PASSWORD 0x26 POSTCODE_CC_CPU_IO 0x27 POSTCODE_CC_BOOT_SCRIPT 0x28 POSTCODE_CC_STATUS_CODE 0x29 POSTCODE_CC_DATA_HUB 0x2A POSTCODE_CC_HII_DATABASE 0x2B POSTCODE_CC_RESET 0x2C POSTCODE_CC_METRONOME 0x2D POSTCODE_CC_INTERRUPT_CONTROLLER 0x2E POSTCODE_CC_DIAGNOSTIC_SUMMARY 0x2F POSTCODE_CC_SMBIOS 0x30 POSTCODE_CC_SMM_COMMUNICATION 0x31 POSTCODE_CC_SMM_RUNTIME 0x32 POSTCODE_CC_SMM_SERVICES 0x33 POSTCODE_CC_FIRMWARE_DEVICE 0x34 POSTCODE_CC_CAPSULE_SERVICES 0x35 POSTCODE_CC_MONOTONIC_COUNTER COMX-CORE-2610-ET Installation and Use (6806800P11E)
  • Page 84 POSTCODE_CC_USER_MANAGER 0x3D POSTCODE_CC_TIMER 0x3E POSTCODE_CC_PCI_BUS 0x3F POSTCODE_CC_ISA_BUS 0x40 POSTCODE_CC_IDE_BUS 0x41 POSTCODE_CC_AHCI_BUS 0x42 POSTCODE_CC_SCSI_BUS 0x43 POSTCODE_CC_USB_BUS 0x44 POSTCODE_CC_FLOPPY 0x45 POSTCODE_CC_SERIAL_PORT 0x46 POSTCODE_CC_PS2_MOUSE 0x47 POSTCODE_CC_PS2_KEYBOARD 0x48 POSTCODE_CC_EHCI 0x49 POSTCODE_CC_XHCI 0x4A POSTCODE_CC_UHCI 0x4B POSTCODE_CC_OHCI 0x4C POSTCODE_CC_USB_KEYBOARD 0x4D POSTCODE_CC_USB_MOUSE COMX-CORE-2610-ET Installation and Use (6806800P11E)
  • Page 85 POSTCODE_CC_DISK_IO 0x54 POSTCODE_CC_PARTITION 0x55 POSTCODE_CC_SETUP 0x56 POSTCODE_CC_LEGACY_BIOS 0x57 POSTCODE_CC_BLOCK_IO_THUNK 0x58 POSTCODE_CC_CRYPTO 0x59 POSTCODE_CC_XHCI_RESET 0xA0 POSTCODE_CC_PLATFORM_STAGE0 0xA1 POSTCODE_CC_PLATFORM_STAGE1 0xA2 POSTCODE_CC_PLATFORM_STAGE2 0xA1 POSTCODE_CC_PLATFORM_DXE 0xA1 POSTCODE_CC_PLATFORM_SMM 0xA2 POSTCODE_CC_PLATFORM_FLASH 0xA3 POSTCODE_CC_PLATFORM_CSM 0xC0 POSTCODE_CC_MEMORY_CONTROLLER 0xC1 POSTCODE_CC_PCIE 0xC2 POSTCODE_CC_MANAGEMENT_ENGINE 0xC3 POSTCODE_CC_PCH COMX-CORE-2610-ET Installation and Use (6806800P11E)

  • Page 86: Table 5-31 Progress Status Codes

    0xD5 POSTCODE_CC_EMBEDDED_CONTROLLER 0xD6 POSTCODE_CC_SERIAL_CONTROLLER Table 5-31 Progress Status Codes Status Code Code Symbol 0x01 POSTCODE_PC_COMP_PEI_BEGIN 0x02 POSTCODE_PC_COMP_PEI_END 0x03 POSTCODE_PC_COMP_DXE_BEGIN 0x04 POSTCODE_PC_COMP_DXE_END 0x05 POSTCODE_PC_COMP_SUPPORTED 0x06 POSTCODE_PC_COMP_START 0x07 POSTCODE_PC_COMP_STOP 0x08 POSTCODE_PC_COMP_SMM_INIT 0x09 POSTCODE_EC_DEVICE_ERROR 0x0A POSTCODE_EC_RESOURCE_ERROR 0x0B POSTCODE_EC_DATA_CORRUPT COMX-CORE-2610-ET Installation and Use (6806800P11E)

  • Page 87: Table 5-32 Architectural Status Codes

    Status Code Code Symbol 0xE0 POSTCODE_PC_SEC_ENTRY 0xE1 POSTCODE_PC_SEC_EXIT 0xE2 POSTCODE_PC_PEI_ENTRY 0xE3 POSTCODE_PC_PEI_EXIT 0xE4 POSTCODE_PC_IPL_DXE 0xE5 POSTCODE_PC_IPL_S3 0xE6 POSTCODE_PC_S3_OS 0xE7 POSTCODE_PC_IPL_RECOVERY 0xE8 POSTCODE_PC_IPL_EXIT 0xE9 POSTCODE_PC_DXE_ENTRY 0xEA POSTCODE_PC_DXE_EXIT 0xEB POSTCODE_EC_PEI_MEMORY 0xEC POSTCODE_EC_PEI_IPL 0xED POSTCODE_EC_IPL_DXE 0xEE POSTCODE_EC_IPL_PPI 0xEF POSTCODE_EC_DXE_ARCH COMX-CORE-2610-ET Installation and Use (6806800P11E)
  • Page 88 BIOS Standard Status Codes COMX-CORE-2610-ET Installation and Use (6806800P11E)

  • Page 89: Table A-1 Smart Embedded Computing Publications

    SMART EC documentation by contacting your local sales representative. Table A-1 SMART Embedded Computing Publications Publication Document Title Number COMX-CORE-2610-ET Quick Start Guide 6806800P03 COMX-CORE-2610-ET Safety Notes Summary 6806800P04 COMX-CORE-2610-ET Installation and Use (6806800P11E)
  • Page 90 Related Documentation SMART Embedded Computing Documentation COMX-CORE-2610-ET Installation and Use (6806800P11E)
  • Page 92 © 2020 SMART Embedded Computing™, Inc. All Rights Reserved. The stylized “S” and “SMART” is a registered trademark of SMART Modular Technologies, Inc. and “SMART Embedded Computing” and the SMART Embedded Computing logo are trademarks of SMART Modular Technologies, Inc. All other names and logos...

Table of Contents