About this Manual
Overview of Contents
This manual is intended for users who install and configure MVME2500 product. It is
assumed that the user is familiar with the standard cabling procedures, configuration of
operating systems, U-Boot system and MVME chassis.
The purpose of this manual is to describe MVME2500 product and the services it provides.
This manual includes description of MVME2500 product hardware, firmware and also
information about operating system.
This manual is divided into the following chapters and appendices:
About this Manual
the revision history.
Safety Notes on page 19
Sicherheitshinweise on page 23
Chapter 1, Introduction on page 27
standard compliances, mechanical data, and ordering information.
Chapter 2, Hardware Preparation and Installation on page 31
requirements, hardware accessories, switch settings, and installation procedures.
Chapter 3, Controls, LEDs, and Connectors on page 41
board. This includes connectors and LEDs.
Chapter 4, Functional Description on page 67
description of major components of the product.
Chapter 5, Memory Maps and Registers on page 89
resources including system control and status registers and external timers.
Chapter 6, Boot System on page 107
Chapter 7, Programming Model on page 117
for the board.
Appendix A, Replacing the Battery on page 127
battery.
Appendix B, Related Documentation on page 129
documentation, manufacturer's documents, and industry standard specifications.
MVME2500 Installation and Use (6806800L01S)
lists all conventions and abbreviations used in this manual and outlines
summarizes the safety instructions in the manual.
is a German translation of the Safety Notes chapter.
gives an overview of the features of the product,
describes the boot loader software.
outlines the installation
describes external interfaces of the
includes a block diagram and functional
contains information on system
contains additional programming information
contains the procedures for replacing the
provides a listing of related product
13
Need help?
Do you have a question about the MVME2500 and is the answer not in the manual?