About This Manual - SMART Embedded Computing MVME4100 Programmer's Reference Manual

About this Manual

Overview of Contents
This manual is divided into the following chapters and appendices:
Chapter 1, Introduction on page
diagram showing the architecture of the MVME4100 Single Board Computer.
Chapter 2, Memory Maps on page
Chapter 3, Register Descriptions on page
resources.
Chapter 4, Programming Details on page
for the board.
Appendix A, Programmable Configuration Data on page
programming information including IDSEL mapping, interrupt assignments for the
MPC8548E interrupt controller, Flash memory, two-wire serial interface addressing, and
other device and system considerations.
Appendix B, Related Documentation on page
Embedded Computing manuals, vendor documentation, and industry specifications.
Abbreviations
This document uses the following abbreviations:
Acronym
ASCII
CRC
EEPROM
FRU
Flash
GB
HEX
Hz
IPMI
MB
MVME4100 Single Board Computer Programmer's Reference (6806800H19D)
15, provides a brief product description and a block
21, provides information on the board's memory maps.
Description
American Standard Code for Information Interchange
Cyclic Redundancy Check
Electrically Erasable Programmable Read Only Memory
Field Replaceable Unit
Flash Memory
Gigabyte
Hexadecimal
Hertz
Intelligent Platform Management Interface
Megabyte
23, contains status registers for the system
47, includes additional programming information
65, provides additional
79, provides a listing of related SMART
11