Table of Contents
Advertisement
•
If a button is pale-yellow or pale-red (disabled), then this means that the setting
is not available. This usually requires that another setting must be enabled
before setting a "sub-set" of that feature.
For example, note that both the Remote UDP Access button and the UDP Port
field are disabled in the illustration, below:
In order to change either of these settings, UDP Access must be enabled.
After clicking the Enable button, next to UDP Access, the button turns red and
reads "Enabled." Since UDP Access is now enabled, we can now enable or
disable Remote UDP Access and/or change the UDP Port number:
►
Legend
The legend, near the bottom-right corner of the screen, defines the colors used to
indicate the status of an input or output:
page | 82
The Web Interface
Advertisement
Table of Contents
