Enabling / Disabling UDP Access
►
a.
From the UDP access screen, press the Enter button on the front panel or the
OK button on the IR remote control. An arrow cursor will be displayed next to
the current setting, indicating that it can be changed:
UDP access:
disabled
b.
Press the Enter button on the front panel or the OK button on the IR remote
control to change the current setting. The cursor will appear next to the current
setting.
udp access:
)Disabled
c.
Press and release the ▲ or ▼ buttons on the front panel or on the IR remote
control, to select the desired setting.
Enabled
►
Allows the UDP protocol to be used with the matrix.
►
Disabled
Prevents the UDP protocol from being used with the matrix.
udp access:
)Enabled
d.
Press the Enter button on the front panel or the OK button on the IR remote
control to save the change.
udp access:
enabled
e.
Reboot the matrix to affect changes.
page | 63
Menu System