Table of Contents
Advertisement
Discovery Protocol Settings
►
•
Enable Discovery: Click the Enable button to enable "discovery" mode.
Otherwise, click the Disabled button. In order for Gefen Syner-G to
discover the matrix on a network, this feature must be enabled.
•
Find Your Device: Click the Show Me button to physically locate the matrix
on a network. In order for the Show Me button to be available, the Enable
Discovery button must be set to Enable. When the Show Me button is clicked,
the button text will change to Hide Me and the buttons, on the front panel,
will flash on the front panel of the matrix:
out a :output a
A/V In:input 01
4K Ultra HD 8x9 Matrix for HDMI
w/ HDCP 2.2, HDBaseT™ & POH
•
Discovery Read Only: When set to Read Only, the IP settings for the
matrix will be displayed by Syner-G but they cannot be changed. In order
GEF-UHD-89-HBT2
to display and change IP settings from within Gefen Syner-G, click the
Ethernet
IR In/Ext
Read / Write button.
IP Control
•
Product Description: GEF-UHD-89-HBT2 is the default product description.
This name will be used to identify the matrix when using the Gefen Syner-G
software.
RS-232
IR
In/Ext
4K Ultra HD
HDBaseT
™
Receiver
w/ HDCP 2.2, POH, Ethernet,
RS-232 & 2-way IR
Ethernet
*Preferred
Menu
®
Back
HDMI
IR All
Local Out
RS-232
RS-232
RS-232
Out
A
B
In
IR In
IR In
IR In
RS-232
IR Out
1
IR Out
2
IR Out
IR
Pwr
HDBaseT™
Out
POH Input
*Preferred
®
HDMI
Out
page | 118
Preset
Enter
Lock
HDBaseT™ POH Outputs
RS-232
RS-232
RS-232
RS-232
C
D
E
F
IR In
IR In
IR In
IR In
3
4
5
6
IR Out
IR Out
IR Out
IR Out
HDMI Inputs
The Web Interface
IR
Power
RS-232
G
H
IR In
7
8
IR Out
Advertisement
Table of Contents
