Gefen GEF-UHD-89-HBT2 User Manual page 188

#set_gateway
Sets the gateway address for the matrix. The gateway address will be changed only if the
matrix is in static IP mode. If the matrix is using DHCP mode, then the gateway address is
automatically assigned by the DHCP server. The matrix must be rebooted after executing
this command.
Syntax
#set_gateway addr
Parameters
addr
Type: IP ADDRESS
The desired gateway address of the matrix. This address must be entered
in dot-decimal notation.
Example
#set_gateway 10.5.64.1
GATEWAY 10.5.64.1
REBOOT TO APPLY SETTINGS
Related Commands
#get_gateway
#get_http_port
#get_ip_address
#get_ip_mode
#get_ipconfig
#get_mac_addr
#get_netmask
#set_http_port
#set_ip_address
#set_ip_mode
#set_netmask
page | 176
Commands Page Title