Gefen GEF-UHD-89-HBT2 User Manual page 24

► IR Control (Optional)
For more information see
10. Connect an IR extender (Gefen part no. EXT-RMT-EXTIRN) to the IR In/Ext port
on the rear panel of the matrix. Alternatively, an electrical IR cable can be connected
from the automation control system to this port.
11. Connect up to eight electrical IR cables from the automation control system to each
IR In port on the rear panel of the matrix.
12. Connect an electrical IR cable from the automation control system to the IR All In
port on the rear panel of the matrix.
13. Connect an IR emitter (Gefen part no. EXT-2IREMIT) to each of the IR Out ports
on the rear panel of the matrix.
14. Connect an IR emitter (Gefen part no. EXT-2IREMIT) to the IR All Out port on the
rear panel of the matrix.
15. Connect an IR extender (Gefen part no. EXT-RMT-EXTIRN) to the IR In/Ext port
on each Receiver unit.
16. Connect an IR emitter (Gefen part no. EXT-2IREMIT) to the IR Out port on each
Receiver unit.
► Power
17. Connect the included IEC power cord between the matrix and an available AC
electrical outlet.
IR Control (page 27).
page | 12
Installation