Table of Contents
Advertisement
The EDID Mode tab allows the desired EDID mode (internal preset, external, or custom)
to be set for each input.
1.
Click the Manage EDID tab within the built-in web interface.
2.
Click the EDID Mode sub-tab.
3.
Select the desired EDID mode for each input using the drop-down list.
If the EDID Mode is set to External, then the name of the downstream EDID (device)
will appear under the EDID Name column, as shown:
Setting the EDID Mode
page | 105
The Web Interface
Advertisement
Table of Contents
