Table of Contents
Advertisement
e.
Press the ◄ or ► buttons on the front panel or on the IR remote control to move
between each digit in the IP address.
f.
After the desired IP address has been set, press the Enter button on the front
panel or the OK button on the IR remote control to save the change.
gateway:
010.005.064.001
g.
Reboot the matrix to affect changes.
►
Setting the HTTP Listening Port
a.
From the IP Mode screen, press and release the ▲ or ▼ buttons on the front
panel or on the IR remote control, to select the HTTP Port option.
The current HTTP port will be displayed.
http port:
80
b.
Press the Enter button on the front panel or the OK button on the IR remote
control to edit the port number. The cursor will appear under the first digit
of the port number.
http port:
_
00080
c.
Press the ▲ or ▼ buttons on the front panel or on the IR remote control,
to change the numerical value of the digit (0 - 9).
d.
Press the ◄ or ► buttons on the front panel or on the IR remote control to move
between each digit in the port number.
e.
After the desired address has been set, press the Enter button on the front panel
or the OK button on the IR remote control to save the change.
http port:
81
f.
Reboot the matrix to affect changes.
page | 56
Menu System
Advertisement
Table of Contents
