Once we have defined an IR routing preset, we may want to save it for later use. This can
be done by saving the current routing state to any one of 16 presets. After a preset has
been saved, it can be edited or recalled for later use within the web interface. Note that the
IR presets are linked to the main presets.
1.
Click the IR Routing tab.
2.
Click the drop-down list to select the desired preset. In this example, we will save
the IR routing state, which we created in the previous section, to Preset 1.
3.
Click the Preset Edit button.
IR Routing Presets
page | 97
The Web Interface