Table of Contents
Advertisement
Command
#set_discovery_mode
#set_edid_copy
#set_edid_lock
#set_edid_mode
#set_feedback
#set_gateway
#set_hdbt_distance
#set_hdbt_ir
#set_http_port
#set_input_hdcp
#set_io_name
#set_ip_address
#set_ip_mode
#set_ir_channel
#set_lcd_brightness
#set_netmask
#set_output_hdcp
#set_preset_name
#set_remote_udp_access
#set_remote_udp_ip
#set_remote_udp_port
#set_showme
#set_telnet_access
#set_telnet_port
#set_telnet_welcome
#set_udp_access
#set_udp_port
#show_firmware_version
#use_telnet_login
ir
m
p
r
Description
Sets the "discovery" mode
Enables or disables EDID copy
Sets the EDID lock setting on the specified input
Sets the EDID mode on the specified input
Enables or disables unsolicited RS-232 feedback
Sets the gateway address
Sets the distance setting for the specified output
Sets the IR setting for the specified output
Sets the HTTP listening port
Sets the HDCP setting on the specified input
Sets the name of the specified input or output
Sets the IP address
Sets the IP mode
Sets the IR channel of the matrix
Sets the brightness of the front-panel display
Sets the subnet mask for the matrix
Sets the HDCP setting on the specified output
Sets the name of the specified preset
Enables or disables remote UDP access
Sets the remote UDP IP address
Sets the remote UDP listening port on the matrix
Enables or disables the "show me" feature
Enables or disables Telnet access
Sets the Telnet listening port on the matrix
Sets the Telnet welcome message
Enables or disables UDP access
Sets the UDP listening port on the matrix
Returns the current firmware version
Enable or disables Telnet login credentials
Routes IR data from a Receiver Unit to an input
Masks or unmasks the specified output
Recalls the specified preset
Routes an input to an output
page | 133
Commands
Page Title
Advertisement
Table of Contents
