Press the Enter button on the front panel or the OK button on the IR remote
7.
control to change the current setting. The cursor will appear next to the current
setting.
discovery:
)Enabled
Press and release the ▲ or ▼ buttons on the front panel or on the IR remote control,
8.
to select the desired setting.
►
Enabled
Allows the matrix to be "discovered", when connected to a network, by the
Syner-G Software Suite.
►
Disabled
Prevents the matrix from being "discovered" by the Syner-G Software Suite.
discovery:
)Disabled
Press the Enter button on the front panel or the OK button on the IR remote control
9.
to save the change.
discovery:
disabled
10. Reboot the matrix to affect changes.
page | 68
Menu System