#set_telnet_welcome
Enables or disables the Telnet welcome message.
Syntax
#set_telnet_welcome state
Parameters
state
Type: INTEGER
Accepts a number, from table below, corresponding to the desired state.
state
0
1
Example
#set_telnet_welcome 1
TELNET WELCOME SCREEN IS ENABLED
Related Commands
#get_telnet_access
#get_telnet_port
#get_telnet_welcome
#set_telnet_access
#set_telnet_port
#use_telnet_login
Description
Disable welcome message
Enable welcome message
page | 195
Commands
Page Title