Gefen GEF-UHD-89-HBT2 User Manual page 16

ID Name
7 RS-232
8 RS-232 (1 - 8)
9 IR In (1 - 8)
10 IR Out (1 - 8)
11 POH Connectors (A - H)
12 HDMI Inputs (1 - 8)
13 Cooling fan assembly
14 Power switch
15 AC Power Receptacle
Description
Connect the RS-232 cable from this port
to an RS-232 device. See
Instructions (page 11)
information.
Connect a 3.5mm mini-stereo to DB-9 cable
from each of these ports to the serial outputs
on the RS-232 automation device.
Connect a 3.5mm-to-3.5mm mini-stereo
cable between each of the IR In ports to an
automation system.
Connect an IR emitter from each IR Out
port to each source device.
Connect a CAT-5 (or better) cable from each
of these ports to a Receiver unit.
Connect up to eight 4K Ultra HD source
devices to the matrix using these HDMI
ports.
Provides active cooling for the matrix by
expelling warm air from the enclosure.
To prevent overheating, make sure this vent
is not blocked.
Press this button to power-on or power-off
the matrix.
Connect the included IEC power cable from
this power connector to an available wall
outlet.
page | 4
Introduction
Connection
for more