Enabling / Disabling Password
►
a.
From the TCP access screen, press and release the ▲ or ▼ buttons on the
front panel or on the IR remote control, to select the Require Password option.
The current setting will be displayed.
require password:
disabled
b.
Press the Enter button on the front panel or the OK button on the IR remote
control to edit the current setting. The cursor will appear next to the current
setting.
require password:
)Disabled
c.
Press and release the ▲ or ▼ buttons on the front panel or on the IR remote
control, to select the desired setting.
Enabled
►
Requires login credentials at the beginning of each Telnet session.
►
Disabled
Login credentials are not required for Telnet sessions.
See
Configuring Network Settings (page 113)
current (default) password.
require password:
)Enabled
d.
Press the Enter button on the front panel or the OK button on the IR remote
control to save the change.
require password:
enabled
e.
Reboot the matrix to affect changes.
for information on changing the
page | 61
Menu System