#get_hdbt_ir
Returns the IR setting for the specified output. The value returned is one of the following:
Value
Description
0
Carrier signal is stripped
1
Carrier signal is intact
2
Carrier signal has been inserted
Syntax
#get_hdbt_ir output tofrom
Parameters
output
Type: CHARACTER
The identifier of the HDMI output (A - H) to query.
tofrom
Type: INTEGER
Accepts a number from the table below, specifying the desired request:
tofrom
0
1
Example
#get_hdbt_ir a 0
HDBT_IR A 0
Related Commands
#get_hdbt_distance
#set_hdbt_distance
#set_hdbt_ir
Description
Returns the IR state from the Receiver
Returns the IR state to the Receiver
page | 142
Commands
Page Title