Gefen GEF-UHD-89-HBT2 User Manual page 190

#set_hdbt_ir
Sets the IR setting for the specified output.
Syntax
#set_hdbt_ir output tofrom signal
Parameters
output
Type: CHARACTER
The identifier of the HDMI output (A - H) to use.
tofrom
Type: INTEGER
Accepts a number from the table below, specifying the desired adjustment:
tofrom
0
1
signal
Type: INTEGER
Accepts a number from the table below, specifying the carrier signal setting:
signal
0
1
2
Example
#set_hdbt_ir a 0 2
HDBT_IR A 0 2
Description
IR signal from the Receiver unit
IR signal to the Receiver unit
Description
Strip carrier signal
Leave carrier signal intact
Insert carrier signal
page | 178
Related Commands
#get_hdbt_distance
#get_hdbt_ir
#set_hdbt_distance
Commands Page Title