Gefen GEF-UHD-89-HBT2 User Manual page 205

#set_telnet_access
Enables or disables Telnet access on the matrix.
Syntax
#set_telnet_access state
Parameters
state
Type: INTEGER
Accepts a number from the table below, corresponding to the desired state.
state
0
1
Example
#set_telnet_access 1
TELNET_ACCESS 1
Related Commands
#get_telnet_access
#get_telnet_port
#get_telnet_welcome
#set_telnet_port
#set_telnet_welcome
#use_telnet_login
Description
Disable Telnet access
Enable Telnet access
page | 193
Commands Page Title