Table of Contents
Advertisement
Setting the IP Mode
►
a.
From the IP Mode screen, press the Enter button on the front panel or the OK
button on the IR remote control. An arrow cursor will be displayed next to the
current IP mode, indicating that it can be changed:
ip mode:
)Static
b.
Press and release the ▲ or ▼ buttons on the front panel or on the IR remote
control, to select the desired IP Mode.
►
Static mode
Allows custom configuration of the IP address, subnet mask, and gateway.
►
DHCP mode
The IP address, subnet mask, and gateway address are automatically
assigned by a DHCP server.
c.
Press the Enter button on the front panel or the OK button on the IR remote
control to save the change.
d.
Reboot the matrix to affect changes.
Setting the IP Address
►
a.
From the IP Mode screen, press and release the ▲ or ▼ buttons on the front
panel or on the IR remote control, to select the IP Address option.
The current IP address will be displayed.
ip address
192.168.001.072
b.
Press the Enter button on the front panel or the OK button on the IR remote
control to edit the IP address.
Important
The IP address can only be changed if the IP Mode is set to Static.
c.
The cursor will appear under the first digit of the IP address.
ip address
_
192.168.001.072
page | 53
Menu System
Advertisement
Table of Contents
