Table of Contents
Advertisement
By default, the names of each output are Output A - Output H. The names of each input
are Input 1 - Input 8. Each of these names can be changed, as desired, to suit the type
of device that is connected to the input or output. This allows easy reference when
performing routing operations.
1.
Click the Setup tab within the built-in web interface.
2.
Click the Names sub-tab.
3.
Click in the field of the desired output or input to be changed.
Once all changes have been made, click the Save button.
4.
5.
The new input / output name(s) will be displayed within the Routing tab. Note that
the new input / output name(s), to the left of each field, will not be changed.
Changing Input and Output Names
page | 101
The Web Interface
Advertisement
Table of Contents
