Press the Enter button on the front panel or the OK button on the IR remote
7.
control to change the current setting. The cursor will appear next to the current
setting.
lcd brightness:
)60
Press and release the ▲ or ▼ buttons on the front panel or on the IR remote control,
8.
to select the desired setting. The range is from 0 to 100 and can be adjusted by
increments of 1.
lcd brightness:
)70
9.
Press the Enter button on the front panel or the OK button on the IR remote control
to save the change.
lcd brightness:
70
10. Reboot the matrix to affect changes.
page | 72
Menu System