7.
After the desired routing states, for input/output have been assigned, provide a name
for the preset in the Preset Name field.
►
To clear the preset selections for the current preset, click the Clear All button.
►
To use the current routing state (dark blue squares) as the preset selection,
click the Select Current button.
►
To abort the editing of the preset, click the Cancel button.
8.
Click the Save to Preset button to save the preset.
9.
Repeat steps 2 - 8, as desired, for each preset.
10. To load a preset, click the desired preset button.
page | 93
The Web Interface