Using Ethernet; Ip Control - Gefen GEF-UHD-89-HBT2 User Manual

w/ HDCP 2.2, HDBaseT™ & POH

Using Ethernet

In order to control matrix operation, provide access to the built-in web interface, and
allow the extension of network devices, connect a shielded CAT-5 (or better) cable to the
Ethernet / IP Control port from the rear panel of the matrix to the Local Area Network.
GEF-UHD-89-HBT2
Ethernet IR In/Ext

IP Control

Once the shielded CAT-5 (or better) cable is connected to the Ethernet / IP Control port,
the matrix can be configured to work on a network. See
Syner-G (page 14) for more information.
RS-232
LAN / Network
4K Ultra HD
HDBaseT ™
w/ HDCP 2.2, POH, Ethernet,
RS-232 & 2-way IR
Ethernet
IP Control
HDMI
IR All Local Out
Out
In
RS-232
IR IR Pwr HDBaseT™
In/Ext Out POH Input
*Preferred
®
Receiver
HDMI
Out
page | 23
RS-232
RS-232
A
IR In
IR In
1
IR Out
IR Out
Network Configuration using
Matrix
RS-232
B C
IR In
2 3
IR Out
RS-232
IR In
IR Out