Table of Contents
Advertisement
The input selection screen will be displayed. Input 01 will be displayed, by default.
7.
hdp control:
pulse: input 01
Press and release the ▲ or ▼ buttons on the front panel or on the IR remote control,
8.
to select the desired input. These buttons will glow blue when they are pressed on the
front panel.
9.
After selecting the desired input, press the Enter button on the front panel. If using
the included IR remote control, press the OK button.
hdp pulsed for input
input 05
10. The HPD pulse will be sent to the selected input. If a display is connected to the
output to which the input is routed, then the display will flash as the HPD pulse is
received.
11. After a few moments, the input selection screen will be displayed again:
hdp control:
pulse: input 05
12. To send an HPD pulse to another input, repeat steps 4 - 7.
13. To return to the HPD Control option, press the Back button on the front panel or on
the IR remote control.
14. To return to the routing screen, press the Back button two more times.
page | 45
Menu System
Advertisement
Table of Contents
