Table of Contents
Advertisement
ir
Routes IR data from any Receiver Unit to any input. Up to eight outputs can be specified
at a time.
Syntax
ir input output [...output]
Parameters
input
Type: INTEGER
The desired input (1 - 8) on the matrix. To have the IR routing follow the input
routing, set this parameter to 0.
output
Type: CHARACTER
The desired output (A - H) receiving the IR data from the source's
remote control. To specify the Local Output, set this parameter to Z.
Example
ir 2 a b d
IR 2 A B D
page | 200
Commands
Page Title
Advertisement
Table of Contents
