Enabling / Disabling TCP (Telnet) Access
►
a.
From the TCP access screen, press the Enter button on the front panel or the
OK button on the IR remote control.
tcp access:
enabled
b.
Press the Enter button on the front panel or the OK button on the IR remote
control to change the current setting. An arrow cursor will be displayed next to
the current setting, indicating that it can be changed:
tcp access:
>enabled
c.
Press and release the ▲ or ▼ buttons on the front panel or on the IR remote
control, to select the desired setting.
Enabled
►
Allows Telnet sessions to the matrix.
►
Disabled
Disables Telnet sessions to the matrix.
tcp access:
)Disabled
d.
Press the Enter button on the front panel or the OK button on the IR remote
control to save the change.
tcp access:
disabled
e.
Reboot the matrix to affect changes.
page | 58
Menu System