Table of Contents
Advertisement
#set_ip_address
Sets the IP address of the matrix. The matrix must be rebooted after executing this
command.
Syntax
#set_ip_address addr
Parameters
addr
Type: IP ADDRESS
The desired IP address of the matrix. This address must be entered
in dot-decimal notation.
Example
#set_ip_address 10.5.64.81
IP_ADDRESS 10.5.64.81
REBOOT TO APPLY SETTINGS
Related Commands
#get_gateway
#get_http_port
#get_ip_address
#get_ip_mode
#get_ipconfig
#get_mac_addr
#get_netmask
#set_gateway
#set_http_port
#set_ip_mode
#set_netmask
page | 182
Commands
Page Title
Advertisement
Table of Contents
