Table of Contents
Advertisement
1.
EXTERNAL MODE:
To use this mode, set the EDID Mode Switch on the front panel to the EXT
position. In External EDID mode, the Matrix directly retrieves EDID data from
each connected A/V display device and builds a new EDID. This new EDID
is sent to the source device.
If suffi cient EDID data is unavailable from external display devices or EDID-
related problems are encountered, Internal EDID Mode should be used to
provide a single compatible EDID for all connected devices.
See page 16 for additional information on how the External EDID is handled.
2.
INTERNAL MODE:
To use this mode, set the EDID Mode Switch on the front panel to the INT
position. This mode will use a preset EDID that is stored in the 4x2 Matrix for
HDMI from the factory. This pre-programmed standard EDID data structure
is compatible with most A/V display devices. All resolutions and audio
formats specifi ed in this EDID will be passed to the source device. Many
common resolutions and audio formats are supported. For a complete listing
of the resolutions and audio formats listed in this EDID please see page 18.
NOTE: All other HDMI capable devices/displays connected to the output
ports MUST be compatible with at least one resolution/audio format specifi ed
in this EDID. It is recommended to set, on the source device, a common
resolution and audio format shared by all attached devices/displays. This is
to ensure a compatible signal is output to all connected devices / displays.
EDID MANAGEMENT
EDID Mode Selection
15
Advertisement
Table of Contents
