Table of Contents
Advertisement
The 4x1 Switcher w/ Audio Decoding has three EDID modes (INT, EXT, and
MIX).
•
INT Mode
The internal (local) EDID is used instead of the EDID from the display
device. EDID features newer than HDMI 1.3 are removed from the EDID
data structure when the display is read. This provides a general EDID which
is compatible with more displays.
•
EXT Mode
The external (downstream) EDID is used. In this mode, both DDC and HPD
are passed through and the Switcher uses the full video capabilities of the
display. The HPD status will also be detected by the source device.
•
MIX Mode
The display capabilities from the external EDID are combined with the audio
capabilities of the internal EDID of the Switcher.
1.
To set the EDID mode, press the Menu button from the Standby screen.
2.
Use the Volume ▲ or Volume ▼ buttons to navigate to the Misc Setup
menu.
3.
Press the Mode / OK button.
4.
Use the Volume ▲ or Volume ▼ buttons to select the EDID adjustment
menu. In the illustration below, the internal (INT) EDID is being used.
5.
To change the EDID mode, press the Mute ► or Input ◄ buttons to the de-
sired EDID mode (below, the mixed-mode EDID has been selected).
6.
Press the Exit button to save the changes and return to the Misc Setup
menu.
MENU SYSTEM
Setting the EDID Mode
Using the front-panel buttons
36
Advertisement
Table of Contents
