Temperature sensor in graphite enclosure Shaft Closing head Recommended fields of application On site measurements in rivers, lakes and wastewater Fish farming Ground water measurements Applications in water laboratories The TetraCon 325/C is especially suitable for higher chemical loads, particularly acidic media. ba55301e04 01/2009...
TetraCon 325 / TetraCon 325/C Cleaning Cleaning CAUTION To clean the sensor, disconnect it from the instrument. Outside cleaning We recommend to clean the sensor thoroughly, especially before measuring low conductivity values. Contamination Cleaning procedure Lime sediments Immerse in acetic acid for 5 minutes (volume...
IP 68 (2 x 10 Pa or 2 bar) resistance cable Cable plug IP 67 (when plugged in) The TetraCon 325 / TetraCon 325/C meets the requirements according to article 3(3) of the directive, 97/23/EC ("pressure equipment directive"). ba55301e04 01/2009...
Page 7
TetraCon 325 / TetraCon 325/C Technical data Measurement Conductivity measuring 1 S/cm ... 2 S/cm conditions range Temperature range -5 ... 80 °C (100 °C) 23 ... 176 °F (212 °F) Max. allowed overpressure 2 x 10 Pa (2 bar)
Page 10
For more information on how Xylem can help you, go to xyleminc.com. ® Service address: Xylem Analytics Germany Sales GmbH & Co. KG Dr.-Karl-Slevogt-Str. 1 82362 Weilheim Germany Tel.: +49 881 183-325 Fax: +49 881 183-414 E-Mail wtw.rma@xyleminc.com Internet: www.WTW.com Xylem Analytics Germany GmbH Dr.-Karl-Slevogt-Str. 1 82362 Weilheim Germany...