Connecting The Power Pack; Mounting The Stand - wtw Cond 7310 Operating Manual

Commissioning
12

3.3.2 Connecting the power pack

CAUTION
The line voltage at the operating site must lie within the input
voltage range of the original power pack (see section 12 T
NICAL DATA
CAUTION
Use original power packs only (see section 12 T
page 50).
1. Connect the plug of the power pack to the socket for the power pack on
the Cond 7310.
2. Connect the original power pack to an easily accessible power outlet.

3.3.3 Mounting the stand

The stand base can be mounted at the right side of the meter.
, page 50).
1
Cond 7310
ECHNICAL DATA
2
ba75933e04
-
ECH
,
06/2013