Mounting Element With Tray Of Reagents - wtw TresCon UNO A111 Operating Manual

TresCon UNO
Reagents
Reagent containers
ba43134e08 05/2017

1.2.2 Mounting element with tray of reagents

The mounting element is made of steel profiles. It is ready for wall
mounting and carries the TresCon UNO enclosure together with the
tray of reagents in the correct distance below.
On the tray of reagents, the reagents for the analyzer module are pro-
vided. The tray of reagents has an outlet where spilled liquids can be
drained off.
Depending on the analyzer module, various reagents are required for
the operation of the TresCon UNO:
 Standard solutions
 Cleaning solution
 Other reagents
The reagents are supplied to the analyzer module via tubes.
The tube connections of the reagent containers are also color coded so
that the tubing can be connected without any problem. The colors cor-
respond to the reagents connections on the analyzer module. This ena-
bles the reagents to be uniquely assigned.
1.2.3 Enclosure
The enclosure of the TresCon UNO consists of a robust synthetic
material. It has a large lockable door on the front. It is opened to switch
the instrument on or off, to operate the controller and to do mainte-
nance work.
The door has a transparent pane so that the measured value can be
read on the outside of the controller and the analyzer module can be
observed during the operation.
The enclosure has the following openings/lead-in ducts on the under-
side:
 Drillings to lead in the reagent tubes
 Cable glands for relay connection cable, valve control line, interface
cable etc.
 Lead-in duct for power cable
 Drain drilling for reagents
Overview
1 - 3