Table of Contents
Advertisement
Chapter 2. Installation
DBU and LAN Card Slots
The DSU IQ rear panel has two card slots (labeled
and
DCE, and ethernet cards. To insert cards, perform the following
steps:
1.
2.
3.
Card slots are keyed to prevent improper installation (i.e., putting a DBU
card into the ethernet slot). The external DCE card is keyed for the DBU
slot.
Failure to remove power from the unit before installing or removing op-
tion cards can damage the unit.
Telco Connector: Network Interface Connection
The DSU IQ has an 8-position modular jack labeled
Telco connector is used for connecting the unit to the DDS network.
The pinout for this connector is listed in Pinouts on page A-1.
2-4
LAN I
) for the installation of dial backup, external
NTERFACE
On the rear panel, turn off the power switch.
Slide the card into the corresponding rear slot until the card
panel is flush with the DSU IQ chassis.
Push card locks in (until they click) to secure the card and
ensure proper installation.
DSU IQ User Manual
DBU
INTERFACE
T
. The
ELCO
61200212L1-1
Advertisement
Table of Contents
