Powering On The Server For The First Time; Prepare The Power Cords - Oracle SPARC T5-4 Installation Manual

Powering On the Server for the First Time

These topics include instructions for powering on the server for the first time and configuring
the Oracle Solaris OS.
Step Description
1.

Prepare the power cords.

2. Connect a serial terminal device or terminal server to
the SER MGT port.
3. Power on the server and start the Oracle ILOM system
console.
4. Configure the preinstalled OS, or install a fresh OS.
5. Set the configuration parameters for the Oracle Solaris
OS.
6. (Optional) Configure the NET MGT port to use a static IP address.
Related Information
"Understanding the Server"
■
"Installing the Server"
■
"Connecting Data and Management Cables" on page 61
■

Prepare the Power Cords

Prepare the power cords by routing them from the AC power source to the server.
Caution -
Use only the power cords provided with the server.
Links
"Prepare the Power Cords" on page 67
"Connect a Terminal or Emulator to the SER MGT
Port" on page 68
"Power on the System for the First Time" on page 70
"Configure the Preinstalled OS" on page 72
"Configure the Preinstalled OS" on page 72
"Reach a State to Install a Fresh OS (Oracle ILOM Web
Interface)" on page 75
"Oracle Solaris OS Configuration Parameters" on page 77
"Assign a Static IP Address to the NET MGT
Port" on page 80
Powering On the Server for the First Time
or
or
67