Powering On The Server For The First Time - Oracle Netra SPARC S7-2 Installation Manual

Powering On the Server for the First Time

These topics include instructions for powering on the server for the first time and configuring
the Oracle Solaris OS.
Step Description
1. Review power requirements.
2. Connect the chassis grounding wire (optional for
AC input power).
3. Connect power cords.
4. Connect a serial terminal device or terminal
server to the SER MGT Port.
5. Power on the server and start the Oracle ILOM
system console.
6. Configure the preinstalled OS, or install a fresh
OS.
7. Set the configuration parameters for the Oracle
Solaris OS.
8. (Optional) Configure the NET MGT port to use a static IP
address.
9. (Optional) Activate Oracle Auto Service Request for the
server.
Links
"Electrical Specifications" on page 18
"Input Power Information" on page 19
"Overcurrent Protection Requirements" on page 20
"DC Power Source, Power Connection, and Grounding
Requirements" on page 21
"Connect the Chassis Ground Wire" on page 72
"Connect AC Power Cords" on page 74
"Assembling and Connecting DC Power Cords" on page 75
"Connect a Terminal or Emulator to the SER MGT
Port" on page 81
"Oracle ILOM System Console" on page 82
"Power on the Server for the First Time" on page 83
or
"Configure the Preinstalled OS" on page 86
"Configure the Preinstalled OS" on page 86
or
"Reach a State to Install a Fresh OS (Oracle ILOM Web
Interface)" on page 88
"Oracle Solaris OS Configuration Parameters" on page 91
"Assign a Static IP Address to the NET MGT Port" on page 92
"Oracle Auto Service Request Software Activation" on page 94
Powering On the Server for the First Time 71