Powering On The Server For The First Time; Prepare The Power Cords - Oracle SPARC T7-4 Installation Manual

Powering On the Server for the First Time

These topics include instructions for powering on the server for the first time and configuring
the Oracle Solaris OS.
Step Description
1.

Prepare the power cords.

2. Connect a serial terminal device or terminal server to
the SER MGT port.
3. Power on the server and start the Oracle ILOM system
console.
4. Configure the preinstalled OS, or install a fresh OS.
5. Set the configuration parameters for the Oracle Solaris
OS.
6. (Optional.) Configure the NET MGT port to use a static
IP address.
Related Information
"Understanding the Server" on page 11
■
"Installing the Server" on page 29
■
"Connecting Data and Management Cables" on page 58
■
Prepare the Power Cords
Prepare the power cords by routing them from the AC power source to the server.
Caution -
Use only the power cords provided with the server.
Links
"Prepare the Power Cords" on page 65
"Connect a Terminal or Emulator to the SER MGT
Port" on page 66
"Power on the Server for the First Time" on page 68
"Configure the Preinstalled OS" on page 71
"Configure the Preinstalled OS" on page 71
State to Install a Fresh OS (Oracle ILOM CLI)" on page 71
"Oracle Solaris OS Configuration Parameters" on page 75
"Assign a Static IP Address to the NET MGT
Port" on page 78
Powering On the Server for the First Time
or
or "Reach a
65