Table of Contents
Advertisement
Beta Draft Confidential
11. At the
Figure A-5. Interfaces File Window
12. Proceed to
Configuring the Remote Backup Server
Before you backup the Sybase 12.5.0.1 Server to the remote backup server for the first
time, follow the steps below to complete the configuration process.
On the Sybase Server Workstation:
1. Log in as the Sybase user by entering:
2. At the
3. Verify that the interfaces file entry for
Note – If necessary, use a text editor such as vi to cut and paste the entry for
REMOTE_SYB_BACKUP
interfaces file on the Sybase Server.
B-STDX, CBX, and GX Network Management Station Installation Guide
prompt, view the updated interfaces file by entering:
$
cat interfaces
Figure A-5
shows an example of an interfaces file.
"Configuring the Remote Backup Server" on page
su - sybase
prompt, view the interfaces file by entering:
$
cat interfaces
Server is identical to the entry for
server.
from the interfaces file on the remote backup server to the
Installing a New Remote Backup Server
Configuring the Remote Backup Server
Remote Backup
server parameters
REMOTE_SYB_BACKUP
REMOTE_SYB_BACKUP
A-9.
on the Sybase
on the remote backup
7/12/04A-9
Advertisement
Table of Contents
