Configuring The Switch; Cajun P120 Default Settings; Switch Settings; Table 4.1 Default Switch Settings - Lucent Technologies CAJUN P120 User Manual

Chapter 4 Installation and Setup

Configuring the Switch

The configuration of the Cajun P120 and its port settings may be performed from a
text-based utility, from the stand-alone Cajun P120 Manager or from CajunView.
For instructions on the text-based utility, see the "Command Line Interface"
chapter.
For instructions on the graphical user interfaces, refer to the "Cajun P120 Manager"
Appendix and the Manager User's Guide on the Management CD.

Cajun P120 Default Settings

The default settings for the Cajun P120 switch and its ports are determined by the
Cajun P120 software and might change in newer versions of the Cajun P120
software. See the Release Notes for the most up-to-date default settings.

Switch Settings

Table 4.1
Function
Cajun P120 IP Address
Bootp Mode
Default Gateway
SLIP Address
Management PC SLIP Address
VLANs
Spanning Tree
TFTP Mode
TFTP Server
TFTP File Name
Address Aging (CAM)
20
Default Switch Settings
Default Setting
149.49.32.134
Never
0.0.0.0
192.168.10.1
192.168.10.2
VLAN 1
Enabled
(Disabled in
Version 1.0)
Limited
0.0.0.0
p120.lst
Enabled
Cajun P120 User's Guide