Daikin VRV III Manual page 113

Accessories
Caution
After thoroughly reading these "Safety precautions", properly perform the installation.
• For the installation parts, accessory parts and specified components must
always be used.
If the specified components are not used, the kit may fall or an air leak may occur.
• After the completion of installation, perform a test run to check that no
abnormality is present.
Recommendations
The ultra-long life filter can be reused after cleaning.
After the engineering works are completed, provide instructions to the customer
about the filter cleaning interval and how to remove the filter.
Parts content Check the following parts.
Name Ultra-long life filter unit
Shape
1
Number of pieces
Mounting of Ultra-Long Life Filter Unit
* When the indoor unit main body is already installed, perform the following operations, complying with
precautions below.
Shut off power supply before performing the operation.
Remove the decoration panel from the indoor unit main body.
(For details, refer to the installation manual attached to the decoration panel.)
* When the indoor unit main body is newly installed
(1) Remove the ultra-long life filter from the chamber. Figure 1
(2) Mount the ultra-long life filter unit to the indoor unit main body using the hooks (4 positions).
Figure 2 to Figure 4
For the fixing method of the hooks, refer to the figure to the right. Mount at 4 positions.
* Mount so that the contours of the indoor unit main body and chamber match. Figure 3
Figure 2
Ultra-long life filter unit
Indoor unit main body
Control box cover
Suspension bracket
(4 positions)
108
Recommendations
•
This product can be mounted to a ceiling mounted cassette-type air conditioner
<Round flow>.
According to the table below, check the model name of the indoor unit main body, then
•
mount the product.
• At the time of mounting, also refer to the installation manual for the indoor unit and to
the one for the decoration panel.
Combination table
Model name
Sealing pad Installation manual
KAFP55H160
Panel
2 1 (This document)
Figure 3
Hook
Hook
(4 positions)
Suspension bracket
Refrigerant piping
Installable indoor unit model name / Panel model name
SkyAir FCQ(N)71·100·125·140KVEA
VRV FXFQ25·32·40·50·63·80·100·125PVE
BYCP125K-W1
Figure 1
Figure 5
Fixing method of hooks
Mounting status
Figure 4
Ultra-long life filter unit
Match the contour.
Indoor unit main body
Figure 5 : Drawing of mounting at completion
Ultra-long life filter unit
Indoor unit main body
: http://splitoff.ru/tehn-doc.html
ED34-862
Ultra-long life filter
Filter clasp
Rotate the filter clasp by
90˚ to remove the filter
(4 positions)
Hook
Suspension bracket
Status after mounting
JC : 3K015221D
FXFQ-P