Daikin VRV III Manual page 106

ED34-862
Precautions
This kit can be mounted to a ceiling mounted cassette-type air conditioner.
When using this kit, a duct (nominal diameter: φ100) is required separately.
• Beware that, in accordance with the local law, there may be cases where the use of a nonflammable duct is compulsory.
• When a duct goes through fire protection areas including a fire proof structure, beware that, in accordance with
it may be required to establish a damper or to build a structure that is not detrimental to fire protection.
• When penetrating a wooden construction wall with a metal duct, apply electrical insulation to the duct and wall.
• Mount the outside duct so that it has a downslope toward the outside, and prevent rainwater from leaking in.
(Gradient of 1/100 to 1/50)
•
To prevent the intrusion of small animals, such as birds, and bugs, be sure to attach a netting to sections open to
outside air.
Parts content Check the following parts.
Name 1 Duct flange
Number of pieces 1
Shape
Tools needed for mounting
Mounting of Duct Flange
1) Cut off the side plate of the indoor unit main body along the dowel hole without damaging
the internal insulator.
Side plate
2) Stick the main body's opening insulator 4 to the opening.
Figure 2
Main body opening insulator 4
FXFQ-P
2 Mounting screws 3 Duct flange insulator
4 1
M4×12
Phillips-type screwdriver, nippers, and cutter, etc.
Figure 1
Internal insulator
Cut off using
nippers, etc.
Slit
4 Main body opening insulator 5 Sealing pad retainer 6 Installation manual
1 1
Piping position
Side plate
Figure 2
: http://splitoff.ru/tehn-doc.html
Accessories
the local law,
1
Drain pipe position
Figure 1
JC : 2P137676B
101
2