Advertisement
Using the Digital Operator
7.1.7 Operation in Monitor Mode
7.1.7 Operation in Monitor Mode
7
YASKAWA
SERVOPACK
SGDH-
MODE/SET
CHARGE
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr
The monitor mode can be used for monitoring the reference values, I/O signal status, and Servo-
pack internal status.
The monitor mode can be set during motor operation.
J J Using the Monitor Mode
The example below shows how to display 1500, the contents of monitor number Un000 when
the Servomotor rotates at 1500 r/min.
With the Hand-held Digital Operator
1. Press the DSPL/SET Key to select the monitor mode.
2. Press the Up or Down Cursor Key to select the monitor number to be displayed.
3. Press the DATA/ENTER Key to display the monitor number selected in the above step 2.
Data
4. Press the DATA/ENTER Key once more to return to the monitor number display.
This is how to display 1500, the contents of monitor number Un000.
With the Panel Operator
200V
1. Press the MODE/SET Key to select the monitor mode.
DATA/
POWER
2. Press the Up or Down Cursor Key to select the monitor number to be displayed.
3. Press the DATA/SHIFT Key for a minimum of one second to display the monitor number
selected in the above step 2.
Data
4. Press the DATA/SHIFT Key once more for a minimum ofone secondto returnto the monitor
number display.
This completes the example procedure for displaying 1500, the contents of monitor number
Un000.
7 -14
Advertisement
