Advertisement
YASKAWA
SERVOPACK
SGDH-
MODE/SET
DATA/
CHARGE
POWER
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr
Using the Panel Operator
200V
1. Press the MODE/SET Key to select the constant setting mode.
2. Press the Up or Down Cursor Key to select the user constant number to be set. (Pn000 is
selected in this example.)
3. Press the DATA/SHIFT Key for a minimum of one second to display the current data for the
selected user constant.
Digit to be set
4. Press the DATA/SHIFT Key to select the digit to be set.
Digit to be set
5. Press the Up or Down Cursor Key to select the value defined as a function setting for the
selected digit.
Digit to be set
Repeat the above steps 4. and 5. for changing the data as required.
6. Press the DATA/SHIFT Key for a minimum of one second to save the data. The display will
flash.
7. Press the DATA/SHIFT Key once more for a minimum of one second to return to the user
constant number display.
This has changed the 1st digit of user constant Pn000 to "1".
7 -13
7.1 Basic Operation
7
Advertisement
